Grandstream Networks UCM6100 Series User Manual

P a g e | 189
UCM6100 Series User Manual
Version 1.0.18.13
CC Max Agents
Configure the maximum number of CCSS agents which may be allocated for this
channel. In other words, this number serves as the maximum number of CC
requests this channel can make. The minimum value is 1.
CC Max Monitors
Configure the maximum number of monitor structures which may be created for
this device. In other words, this number tells how many callers may request CC
services for a specific device at one time.
The minimum value is 1.
Table 56: Create New IAX Trunk
Type
Select the VoIP trunk type.
• Peer IAX Trunk
• Register IAX Trunk
Provider Name
Configure a unique label to identify this trunk when listed in outbound rules,
inbound rules etc.
Host Name
Configure the IP address or URL for the VoIP provider’s server of the trunk.
Keep Trunk CID
If enabled, the trunk CID will not be overridden by extension's CID when the
extension has CID configured. The default setting is "No".
Username
Enter the username to register to the trunk from the provider when "Register IAX
Trunk" type is selected.
Password
Enter the password to register to the trunk from the provider when "Register IAX
Trunk" type is selected.
Disable This Trunk
If selected, the trunk will be disabled.
Table 57: IAX Register Trunk Configuration Parameters
Basic Settings
Provider Name
Configure a unique label to identify this trunk when listed in outbound rules,
inbound rules etc.
Host Name
Configure the IP address or URL for the VoIP provider’s server of the trunk.
Keep Trunk CID
If enabled, the trunk CID will not be overridden by extension's CID when the
extension has CID configured.
The default setting is "No".
Disable This Trunk
If selected, the trunk will be disabled.
Caller ID
Configure the Caller ID. This is the number that the trunk will try to use when
making outbound calls. For some providers, it might not be possible to set the
CallerID with this option and this option will be ignored.
Important Note: When making outgoing calls, the following priority order rule will
be used to determine which CallerID will be set before sending out the call :
From user (Register Trunk Only) → CID from inbound call (Keep Original CID

Grandstream Networks UCM6100 Series Specifications

General

Brand	Grandstream Networks
Model	UCM6100 Series
Category	PBX
Language	English