UCM6100 Series User Manual
Version 1.0.18.13
Table 73: Paging/Intercom Group Configuration Parameters
Configure paging/intercom group name.
Configure the paging/intercom group extension.
Select "2-way Intercom" or "1-way Page".
This option is to set a custom prompt for a paging/intercom group to announce
to caller. Click on ‘Prompt’, it will direct the users to upload the customized voice
prompts.
Note: Users can also refer to the page PBX Settings→Voice Prompt→Custom
Prompt, where they could record new prompt or upload prompt files.
Page/Intercom Group
Members
Select available users from the left side to the paging/intercom group member
list on the right.
Paging/Intercom
Whitelist
Select which extensions are allowed to use the paging/intercom feature for this
paging group.
• Click on to edit the paging/intercom group.
• Click on to delete the paging/intercom group.
• Click on "Paging/Intercom Group Settings" to edit Alert-Info Header. This header will be included in the SIP
INVITE message sent to the callee in paging/intercom call.
Figure 152: Page/Intercom Group Settings
• The UCM6100 has pre-configured paging/intercom feature code. By default, the Paging Prefix is *81 and
the Intercom Prefix is *80. To edit page/intercom feature code, click on "Feature Codes" in the
"Paging/Intercom Group Settings" dialog. Or users could go to Web GUI→Call Features→Feature Codes
directly.
To Next Page
Loading...
Need help?
General
