Grandstream Networks UCM6100 Series User Manual

P a g e | 409
UCM6100 Series User Manual
Version 1.0.18.13
Figure 298: USB/SD Card Files Cleanup
Table 133: USB/SD Card Files Cleanup
Current Path
Displays the current path.
Directory
Select the directory user want to clean.
Delete Selected File
Select multiple entries to delete from USB or SD card.
System Recovery
In some cases (for example after wrong upgrading procedure where the user doesn’t follow the correct steps to
perform an upgrade) the system may go into some hardware/software issues where the web UI access is lost
as well as SSH, in this case the only solution would be to perform a full system recovery in order to reset or
update the software version of the device in order to use it again.
1. To access recovery mode on UCM, please follow below steps:
2. Remove the power from the unit and keep the network cable connected.
3. Press using a PIN the reset button and keep holding.
4. Plug back the power supply while maintaining the reset button pressed.
5. Wait for couple of seconds until you hear a click sound.

Grandstream Networks UCM6100 Series Specifications

General

Brand	Grandstream Networks
Model	UCM6100 Series
Category	PBX
Language	English