Grandstream Networks UCM6100 Series

P a g e | 354
UCM6100 Series User Manual
Version 1.0.18.13
Once the call is made on the time specified, the following figure show the status of the wakeup call.
Figure 237: Wakeup Call executed
This call has been executed but has been rejected, that why we can see the “Busy” status.
Mini Bar
In order to create a new mini bar, click on under UCM webGUI→Value-added
Features→PMS→Mini Bar, the following window will pop up:
Figure 238: Create New Mini Bar
Table 114: Create New Mini Bar
Code
Enter a non-existing extension number to be dialed when
using the mini bar feature.
Name
Enter a name for the mini bar.
Prompt
Select the Prompt to play once connected to the mini bar.
Skip Maid and Password
Authentication
If enabled, the default maid code will be 0000, no
authentication is required. (Enter 0000 followed by # to access
the consumer goods)
Enable Continuous Multi Goods
Billing
If enabled, please separate the goods’ codes by*.