To Next Page

To Previous Page

P a g e | 288

UCM6100 Series User Manual

Version 1.0.18.13

The table below gives more description of the configuration Parameters when creating emergency numbers.

Table 84: Emergency Numbers Parameters

Name

Configure the name of the emergency call.

For example, "emergency911","emergency211" and etc.

Emergency Number

Config the emergency service number. For example,"911","211" and etc.

Emergency Level

Select the emergency level of the number. Level "3" means the most

urgent.

Disable Hunt on Busy

If this option is not enabled, when the lines of trunks which the coming

emergency call routes by are completely occupied, the line-grabbing

function will automatically cut off a line from all busy lines so that the

coming emergency call can seize it for dialing out. This option is not

enabled by default.

Custom Prompt

This option sets a custom prompt to be used as an announcement to the

person receiving an emergency call. The file can be uploaded from the

page "Custom Prompt". Click "Prompt" to add additional record.

Use Trunks

Select the trunks for the emergency call. Select one trunk at least, and

select five trunks at most.

Members Notified

Select the members who will be notified when an emergency call occurs.

Figure 186: 911 Emergency Sample

Grandstream Networks UCM6100 Series User Manual

Other manuals for Grandstream Networks UCM6100 Series