Note: the size for the uploaded file should be less than 30M, the compressed file will be applied to the entire
MoH.
The UCM6100 allows Users to select the Music on Hold file from WebGUI to play it. The UCM6100 will initiate
a call to the selected extension and play this Music on Hold file once the call is answered.
Steps to play the music on hold file:
1. Click on the button for the Music on Hold file.
2. In the prompted window, select the extension to playback and click .
Figure 165: Play Custom Prompt
3. The selected extension will ring.
4. Answer the call to listen to the music playback.
Users could also record their own Music on hold to override an existing custom prompt, this can be done by
following those steps:
1. Click on .
2. A prompt of confirmation will pop up, as shown below.
Figure 166: Information Prompt
3. Click .
4. In the prompted window, select the extension to playback and click .
To Next Page
Loading...
Need help?
General
