UCM6100 Series User Manual
Version 1.0.18.13
• Password must be at least 4 characters and different than conference
extension number.
If enabled, conference participant could press the * key to access the conference
room menu. The default setting is "No".
If enabled, the calls in this conference room will be recorded automatically in
a .wav format file. All the recording files will be displayed and can be downloaded
in the conference web page. The default setting is "No".
If enabled, if there are users joining or leaving the conference, voice prompt or
notification tone won't be played. The default setting is "No".
Note:
"Quiet Mode" and "Announce Callers" cannot be enabled at the same time.
If enabled, the participants will not hear each other until the conference
administrator joins the conference. The default setting is "No".
Note:
If "Quiet Mode" is enabled, the voice prompt for "Wait For Admin" will not be
announced.
If enabled, users could press 0 to invite other users (with the users' permission) or
press 1 to invite other users (without the user's permission) to join the conference.
The default setting is "No".
Note:
Conference administrator can always invite other users without enabling this
option.
If enabled, the caller will be announced to all conference participants when there
the caller joins the conference. The default setting is "No".
Note:
"Quiet Mode" and "Announce Callers" cannot be enabled at the same time.
If enabled, no authentication will be required when joining the conference call. The
default setting is "Yes".
If enabled, the UCM6100 will play Hold music when there is only one user in the
conference. The default setting is "No".
Select the music on hold class to be played in conference call. Music On Hold
class can be set up under Web GUI→PBX Settings→Music On Hold.
To Next Page
Loading...
Need help?
General
