Firmware Version 1.0.9.26
UCM6100 Series IP PBX User Manual
Added option to specify web access session timer. [LOGIN TIMEOUT SETTINGS]
Added call monitor/barge-in support. [ACTIVE CALLS AND MONITOR]
Added GSwave QR code support. [EMAIL TO USER]
Added ability to add customized Pvalue on Model Template. [MODEL TEMPLATES]
Updated maximum length of web UI login password to 30 characters. [CHANGE PASSWORD]
Added Fax gateway support for Fax mode on FXS and FXO port. [Table 43: FXS Extension
Configuration Parameters - Media] [Table 48: Analog Trunk Configuration Parameters]
Added “NAT” option and “Send PPI Header” option in SIP register trunk configuration. [Table 51:
SIP Register Trunk Configuration Parameters]
Added REC API (access for call recording files). [API CONFIGURATION]
Added “Synchronize All Data” option in Data Sync. [DATA SYNC]
Added “Delect Selected Sound Files” option for Music On Hold files. [MUSIC ON HOLD]
FIRMWARE VERSION 1.0.7.11
Added office time and holiday setting. [OFFICE TIME] [HOLIDAY]
Added new architecture for auto provisioning via Zero Config. [
To Next Page
Loading...
Need help?
General
