To Next Page

To Previous Page

Firmware Version 1.0.9.26

UCM6100 Series IP PBX User Manual

Page 21 of 305

 Added payload configuration for audio/video codecs. [INTERNAL OPTIONS/PAYLOAD]

 Added activity calls status on web UI status page.

 Added CDR API support. [API CONFIGURATION]

 Added more alert events support such as Register SIP Failed, Register SIP Trunk Failed, Restore

Config, User Login Success, User Login Failed, SIP Internal Call Failure and etc. [ALERT

EVENTS LIST]

FIRMWARE VERSION 1.0.5.19

 Added built-in data migration tool to support upgrading from 1.0.4.7 to 1.0.5.19 without factory

reset.

 Added "Direct Dial Voicemail Prefix" feature code back. [Table 75: UCM6100 Feature Codes]

 Changed valid range for option "Current Disconnect Threshold". [Table 48: Analog Trunk

Configuration Parameters]

FIRMWARE VERSION 1.0.5.14

 New backend data structure and web UI performance improvement. 1.0.5.14 is not compatible

with previous firmware versions. Once upgraded to 1.0.5.14, the device needs to be FULLY

RESET and RE-CONFIGURED MANUALLY.

 Added traditional Chinese language for web UI. [WEB GUI LANGUAGES]

 Updated LDAP configuration example. [LDAP SERVER]

 Added "Enable Filter Source Caller ID" and "Custom Dynamic Route" options for outbound route

settings. [Table 57: Outbound Route Configuration Parameters]

 Added more language support for voice prompt. [LANGUAGE SETTINGS FOR VOICE PROMPT]

 Added "Ring Group Destination" for ring group configuration. [Table 66: Ring Group Parameters]

 Added "Extension Groups" section in web UI. [EXTENSION GROUPS]

 Added "Pickup Groups" section in web UI. [PICKUP GROUPS]

 Added BLF function description. [BLF AND EVENT LIST]

 Updated default extension range. [Table 76: Internal Options/General]

 Added sample descriptions for downloaded CDR file. [DOWNLOADED CDR FILE]

FIRMWARE VERSION 1.0.4.7

 Asterisk updated to version 1.8.23.1.

 Added DID routing support for incoming calls. [Table 50: Create New SIP Trunk]

 Added DOD routing support. [DIRECT OUTWARD DIALING (DOD)]

 Added GXP one-button Voicemail access. [Table 34: SIP Extension Configuration Parameters]

Grandstream Networks UCM6102 User Manual

Other manuals for Grandstream Networks UCM6102