Firmware Version 1.0.9.26
UCM6100 Series IP PBX User Manual
ONE-KEY DIAL
The UCM6100 supports One-Key Dial that allows users to call a certain destination by pressing one digit 0
to 9 on the keypad. This creates a system-wide speed dial access for all the extensions on the UCM6100.
To enable One-Key Dial, on the UCM6100 web GUI, go to page PBX->Call Features->One-Key Dial.
Figure 132: Configure One-Key Dial
User should first decide a digit used for One-Key Dial and check the option “Enable Destination” for the
digit. Then select a dial destination from “Default Destination”. The supported destinations include
extension, voicemail, conference room, voicemail group, IVR, ring group, call queue, page group, fax,
DISA, Dial by Name and external number.
To Next Page
Loading...
