Firmware Version 1.0.9.26
UCM6100 Series IP PBX User Manual
DDNS SETTINGS
DDNS setting allows user to access UCM6100 via domain name instead of IP address.
The UCM supports DDNS service from the following DDNS provider:
dydns.org
noip.com
freedns.afraid.org
zoneedit.com
oray.net
Here is an example of using noip.com for DDNS.
1. Register domain in DDNS service provider. Please note the UCM6100 needs to have public IP access.
Figure 31: Register Domain Name on noip.com
2. On web UI->Settings->Network Settings->DDNS Settings, enable DDNS service and configure
username, password and host name.
To Next Page
Loading...
