Firmware Version 1.0.9.26
UCM6100 Series IP PBX User Manual
Table 99: System Status->Network
Status -> System Status -> Network
Global unique ID of device, in HEX format. The MAC address can be found on the
label coming with original box and on the label located on the bottom of the device.
STORAGE USAGE
Users could access the storage usage information from Web GUI->Status->System Status->Storage
Usage. It shows the available and used space for the following partitions.
ï‚· Configuration partition
This partition contains PBX system configuration files and service configuration files.
ï‚· Data partition
Voicemail, recording files, IVR file, Music on Hold files and etc.
ï‚· USB disk
USB disk will display if connected.
ï‚· SD Card
SD Card will display if connected.
Figure 159: System Status->Storage Usage