GRAUPNER mz-24 PRO - Page 135

CH1
CH9
CH5
CH2
CH10
CH6
NONE
CH3
CH11
CH7
NONE
>>
BACK
CLR
CH4
CH12
CH8
SERVO
PHASE 1 Prog.MIX
Press
As soon as the control function is selected, its val-
ue is transferred to the active MST field:
CH1
CH9
CH5
CH2
CH10
CH6
CH1
CH3
CH11
CH7
NONE
>>
BACK
CLR
CH4
CH12
CH8
SERVO
PHASE 1 Prog. MIX
Press the CLR button to reset the default value in
the blue field (NONE).
Notice
Do not forget to assign switches to the select-
ed control functions 5 to 12 in the BASE sub-
menu CTL Set (page 90).
• SLV
To choose the target (slave) channel for mixer out-
put, press the second (right) NONE button:
CH1
CH9
CH5
CH2
CH10
CH6
CH1
CH3
CH11
CH7
NONE
>>
BACK
CLR
CH4
CH12
CH8
SERVO
PHASE 1 Prog. MIX
Press
The button highlights blue:
CH1
CH9
CH5
CH2
CH10
CH6
CH1
CH3
CH11
CH7
NONE
>>
BACK
CLR
CH4
CH12
CH8
SERVO
PHASE 1 Prog. MIX
Press to select control function 1 to 12. In the ex-
ample below, CH3 needs to be assigned:
CH1
CH9
CH5
CH2
CH10
CH6
CH1
CH3
CH11
CH7
NONE
>>
BACK
CLR
CH4
CH12
CH8
SERVO
PHASE 1 Prog. MIX
Press
As soon as the control function is selected, its val-
ue is transferred to the active SLV field:
CH1
CH9
CH5
CH2
CH10
CH6
CH1
CH3
CH11
CH7
CH3
>>
BACK
CLR
CH4
CH12
CH8
SERVO
PHASE 1 Prog. MIX
Press the CLR button to reset the default value in
the blue field (NONE).
Tip
A mixer programmed with the same input and output
channels (such as CH1 >> CH1) allows for special
effects when turning programmable mixers on and
off as desired.
To store the selected settings, press the BACK but-
ton at the top left of the display:
CH1
CH9
CH5
CH2
CH10
CH6
CH1
CH3
CH11
CH7
CH3
>>
BACK
CLR
CH4
CH12
CH8
SERVO
PHASE 1 Prog. MIX
Press
The Prog.MIX display screen appears with the mixer
selections showing in Line 1:
BACK
SERVO
2.
3.
4.
INH
INH
NEXT
INH
1.
INH
NONE
NONE
NONE
CH1
NONE
NONE
NONE
CH3
>>
>>
>>
>>
ACT
SLVMST
SET
5.
INH
NONE
NONE
>>
PHASE 1 Prog. MIX
>>
LIN.MIX
135
Function menu | general - Free mixer