GRAUPNER mz-24 PRO - Page 136

Activating and Deactivating Mixers
To activate (ON) or deactivate (INH) a mixer that has
been setup as described above, press the value field
in the ACT column of the appropriate mixer. In the
example below, the mixer assigned to Line 1 needs to
be activated:
BACK
SERVO
2.
3.
4.
INH
INH
NEXT
INH
1.
INH
NONE
NONE
NONE
CH1
NONE
NONE
NONE
CH3
>>
>>
>>
>>
ACT
SLVMST
SET
5.
INH
NONE
NONE
>>
PHASE 1 Prog. MIX
>>
LIN.MIX
Press
The Line 1 mixer is now activated (ON):
BACK
SERVO
2.
3.
4.
INH
INH
NEXT
INH
1.
ON
NONE
NONE
NONE
CH1
NONE
NONE
NONE
CH3
>>
>>
>>
>>
ACT
SLVMST
SET
5.
INH
NONE
NONE
>>
PHASE 1 Prog. MIX
>>
LIN.MIX
Deleting Mixers
To reset a mixer, press either the MST or SLV column
button of the appropriate mixer line. In the example
below, the mixer assigned to Line 4 needs to be de-
leted:
BACK
SERVO
2.
3.
4.
ON
ON
NEXT
ON
1.
ON
CH6
CH7
CH3
CH1
CH3
CH8
CH8
CH3
>>
>>
>>
>>
ACT
SLVMST
SET
5.
INH
NONE
NONE
>>
PHASE 1 Prog. MIX
>>
>>
>>
>>
LIN.MIX
Press
Both the MST and SLV column buttons will open the
channel selection display screen:
CH1
CH9
CH5
CH2
CH10
CH6
CH7
CH3
CH11
CH7
CH8
>>
BACK
CLR
CH4
CH12
CH8
SERVO
PHASE 1 Prog. MIX
Press either the MST or SLV channel buttons in the
top left of the screen. When cleared, both fields will
return to their default settings so it doesn’t matter
which field is chosen. In the example below,  CH8
will be highlighted:
CH1
CH9
CH5
CH2
CH10
CH6
CH7
CH3
CH11
CH7
CH8
>>
BACK
CLR
CH4
CH12
CH8
SERVO
PHASE 1 Prog. MIX
Press
The button highlights blue:
CH1
CH9
CH5
CH2
CH10
CH6
CH7
CH3
CH11
CH7
CH8
>>
BACK
CLR
CH4
CH12
CH8
SERVO
PHASE 1 Prog.MIX
Press the CLR button to reset both default values in
the blue and black MST and SLV fields:
CH1
CH9
CH5
CH2
CH10
CH6
CH7
CH3
CH11
CH7
CH8
>>
BACK
CLR
CH4
CH12
CH8
SERVO
PHASE 1 Prog.MIX
Press
The fields have been reset to default:
CH1
CH9
CH5
CH2
CH10
CH6
NONE
CH3
CH11
CH7
NONE
>>
BACK
CLR
CH4
CH12
CH8
SERVO
PHASE 1 Prog.MIX
Press the BACK button at the top left of the display
to return to the mixer selection.
Linear (1 to 5) Mixer Setup
To set linear mixers 1-5, press the brackets >> but-
ton in the SET column in the appropriate mixer line:
BACK
SERVO
2.
3.
4.
ON
INH
NEXT
ON
1.
ON
CH6
NONE
CH3
CH1
CH3
NONE
CH8
CH3
>>
>>
>>
>>
ACT
SLVMST
SET
5.
INH
NONE
NONE
>>
PHASE 1 Prog.MIX
>>
>>
>>
LIN.MIX
Press
136 Function menu | general - Free mixer