GRAUPNER mz-24 PRO - Page 218

Outdoor Disp Line
Use this option to maintain the legibility of the display
screens even in bright surroundings or sunlight. By
turning this option on, legibility changes to “high con-
trast.”
To activate or deactivate this function, press the ON
or OFF button in the Outdoor disp line:
Display
BACK
Backlight off
Touch sense
Logo color
Outdoor disp
RFID
30s
3
PINK
OFF
Brightness
20
AAAAA876
INC
RES
DEC
Press
The field value changes to the opposite function:
Display
BACK
Backlight off
Touch sense
Logo color
Outdoor disp
RFID
30s
3
PINK
ON
Brightness
20
AAAAA876
INC
RES
DEC
Notice
Activating the Outdoor Disp option will change
the display screen shown in the TELEMETRY
menu. Refer to the Telemetry Data Display
section for more information (page 225).
RFID Line
To determine theradio frequency identification of the
transmitter, refer to the final line of the Display screen:
Display
BACK
Backlight off
Touch sense
Logo color
Outdoor disp
RFID
30s
3
PINK
ON
Brightness
20
AAAAA876
INC
RES
DEC
This identification is specific to each transmitter,
is only issued once per transmitter, and cannot be
changed. This ID is transmitted to the receiver during
the HoTT-synchronization process, allowing it to al-
ways identify the radio signals of its bound transmitter.
Press BACK to return to the SYSTEM menu.
218 System menu - Display