GRAUPNER mz-24 PRO - Page 27

Assigning Logical Switch or Control
• Switch Assignment
Logical switches can be assigned to a function
wherever there is a CTL value field. In the example
below, the D/R,EXP display menu has a CTL line:
BACK
CH
D/R
EXP
CTL
CH 2
+100%
+100%
NULL
INC
RES
DEC
PHASE 1
000%
000%
SERVO
SYM
OFF
D/R,EXP
To assign a switch, press NULL button in the CTL
line:
BACK
CH
D/R
EXP
CTL
CH 2
+100%
+100%
NULL
INC
RES
DEC
PHASE 1
000%
000%
SERVO
SYM
OFF
D/R,EXPO
Press
The active window will appear:
BACK
CH
D/R
EXP
CTL
CH 2
+100%
+100%
NULL
INC
RES
DEC
PHASE 1
000%
000%
SERVO
SYM
OFF
D/R,EXP
Select
CLR
NO
LOGIC
Move the desired switch. In the example below,
the front left 3-way switch S5 is assigned:
BACK
CH
D/R
EXP
CTL
CH 2
+100%
+100%
SW 5
INC
RES
DEC
PHASE 1
000%
000%
SERVO
SYM
OFF
D/R,EXP
The assigned switch appears in the CTL value
field. Press the BACK button to save and exit.
• Switch Setup
For certain functions, the exact switch position
needs to be assigned. In the example below,
PHASE3 needs to be assigned to S1:
BACK
1.
2.
3.
4.
5.
NORMAL
CPY
DEL
DEC
0.0s
NAM
NEXT
NEW
INC
START
PHASE 3
PHASE 4
PHASE 5
PHASE
SLOW
CTL
PHASE
SET
0.0s SW 1
0.0s NULL
Press the NULL button. The active window ap-
pears (as described above). Flip the S1 switch. As
soon as the switch is flipped, an accessory display
will appear:
BACK
OFF
SW 1
OFF
OFF

Press any OFF button at any time to activate the
switch position. The value field will change to ON
and the switch graphic display will color in blue
(up), green (center), or red (down). In the example
below, the down switch direction was activated:
BACK
ON
SW 1
OFF
OFF

This switch position must be logically matched
with the other switch positions.
To remove the position assignment, press the ON
button to change the field to OFF.
Notice
When none of the assigned phase switches
are in the "ON" position, the default "normal
phase" (Phase 1) will activate.
If a 2-stage switch is chosen instead of a 3-stage
switch, the center position option will disappear.
In the example below, the 2-stage S6 was chosen:
BACK
OFF
SW 6
OFF

Select the desired switch direction by pressing the
appropriate OFF button.
27
Control and switch assignment