16-30 16. Fuji Electric
Available Device Memory
The available setting range of device memory varies depending on the model. Be sure to set within the range available for the
model to be used. Use [TYPE] when assigning indirect device memory for macro programs.
Device Memory TYPE Remarks
4 (holding register) 02H
3(input register) 03H
Note on Setting the Device Memory
In accordance with the connected PUM model, set the “List” file name to be browsed by pressing the [Refer] button.
“F_PUMA_B.Lst” is set as default.
Model List File Name
PUMAxx Control module (4 ch)
F_PUMA_B.Lst
PUMBxx Control module (2 ch)
PUMExx Event input/output module F_PUME.Lst
To Next Page
Loading...
Need help?
General
