Hakko Electronics Monitouch V9 Series User Manual

1.3 Connection Methods 1-41
1.3.3 Network Communication (Under Development)
Overview
 The optional communication interface unit “CUR-xx” is required to enable a network communication listed below.
*1 In addition to UDP/IP communication with a PLC, screen program transfer, the MES interface function, and TELLUS & V-Server
connection can be enabled by connecting a PC. Use the built-in LAN port for TCP/IP communication.
 You can make settings for network communication in [Communication Setting] for the logical port PLC1. Thus, devices
available with only PLC1, as those used for multi-link or multi-link2, cannot be connected concurrently for network
communication.
V-SFT Ver. 6 Settings
For more information, refer to the communication unit specifications provided for each network.
Wiring
For more information, refer to the communication unit specifications provided for each network.
Communication Interface
Unit
Network Available Models Remarks
CUR-00 OPCN-1
Mitsubishi Electric A series (OPCN-1)
OMRON SYSMAC C (OPCN-1)
Fuji Electric MICREX-SX (OPCN-1)
Under
development
CUR-01 T-Link
Fuji Electric MICREX-F (T-LINK)
Fuji Electric MICREX SX (T-LINK)
Under
development
CUR-02 CC-LINK Ver.2.0
Mitsubishi Electric A series (CC-LINK)
Mitsubishi Electric QnA series (CC-LINK)
Mitsubishi Electric QnH (Q) series (CC-LINK)
Under
development
CUR-03
Ethernet
*1
Various PLCs Ethernet UDP/IP communication
Under
development
CUR-04 PROFIBUS-DP
Siemens S7 PROFIBUS-DP
Universal PROFIBUS-DP
Under
development
CUR-06 SX BUS Fuji Electric MICREX-SX (SX BUS)
Under
development
CUR-07 DeviceNet -
Under
development
CUR-08 FL-Net Universal FL-Net
Under
development

Hakko Electronics Monitouch V9 Series Specifications

General

Brand	Hakko Electronics
Model	Monitouch V9 Series
Category	Monitor
Language	English