Hakko Electronics Monitouch V9 Series User Manual

Preface
Thank you for selecting the MONITOUCH V9 series.
For correct set-up of the V9 series, you are requested to read through this manual to understand more about the product.
For more information about the V9 series, refer to the following related manuals.
For further details about PLCs, inverters, or temperature controllers, refer to the manual attached to each controller.
Manual Name Contents
Reference
No.
V9 Series
Connection Manual [1]
The connection and communication parameters for the V9 series and controllers
are explained in detail.
Included Makers
ALLEN BRADLEY, Automationdirect, Azbil, Baumuller, BECKHOFF, CHINO,
CIMON, DELTA, DELTA TAU DATA SYSTEMS, EATON Cutler-Hammer,
EMERSON, FANUC, Fatek Automation, FUFENG, Fuji Electric, Gammaflux,
GE Fanuc, Hitachi, Hitachi Industrial Equipment Systems
2210NE
V9 Series
Connection Manual [2]
The connection and communication parameters for the V9 series and controllers
are explained in detail.
Included Makers
IAI, IDEC, JTEKT, KEYENCE, KOGANEI, KOYO ELECTRONICS, LS,
MITSUBISHI ELECTRIC, MODICON, MOELLER, M-SYSTEM, OMRON,
Oriental Motor, Panasonic, RKC, RS Automation
2211NE
V9 Series
Connection Manual [3]
The connection and communication parameters for the V9 series and controllers
are explained in detail.
Included Makers
SAIA, SAMSUNG, SanRex, SANMEI, SHARP, SHIMADEN, SHINKO TECHNOS,
Siemens, SINFONIA TECHNOLOGY, TECO, Telemecanique, TOHO, TOSHIBA,
TOSHIBA MACHINE, TURCK, UNIPULSE, UNITRONICS, VIGOR, WAGO, XINJE,
YAMAHA, Yaskawa Electric, Yokogawa Electric, MODBUS, Barcode Reader,
Slave Communication Function, Universal Serial Communication
2212NE
V9 Series
Reference Manual [1]
The functions and instructions of the V9 series are explained. 1065NE
V9 Series
Reference Manual [2]
1066NE
V9 Series
Troubleshooting/Maintenance
Manual
Errors and operation procedures of the V9 series are explained. 1068NE
V9 Series
Hardware Specifications
Notes on usage and hardware specifications for the V9 series are explained. 2023NE
V9 Series
Macro Reference
An overview of macros of V-SFT version 6 as well as macro editor operations and
macro command descriptions are explained.
1071NE
Notes:
1. This manual may not, in whole or in part, be printed or reproduced without the prior written consent of Hakko Electronics
Co., Ltd.
2. The information in this manual is subject to change without prior notice.
3. Windows and Excel are registered trademarks of Microsoft Corporation in the United States and other countries.
4. All other company names or product names are trademarks or registered trademarks of their respective holders.
5. This manual is intended to give accurate information about MONITOUCH hardware. If you have any questions, please
contact your local distributor.

Hakko Electronics Monitouch V9 Series Specifications

General

Brand	Hakko Electronics
Model	Monitouch V9 Series
Category	Monitor
Language	English