16-74 16. Fuji Electric
Available Device Memory
The available setting range of device memory varies depending on the model. Be sure to set within the range available for the
model to be used. Use [TYPE] when assigning indirect device memory for macro programs.
Device Memory TYPE Remarks
F00 (setting value file) 00H
F01 (range file CH1) 01H
F02 (range file CH2) 02H
F03 (range file CH3) 03H
F04 (range file CH4) 04H
F05 (range file CH5) 05H
F06 (range file CH6) 06H
F07 (range file CH7) 07H
F08 (range file CH8) 08H
F09 (range file CH9) 09H
F10 (range file CH10) 0AH
F11 (range file CH11) 0BH
F12 (range file CH12) 0CH
F13 (warning setting file) 0DH
F14 (system file) 0EH
F15 (command file) 0FH
F16 (abnormal input information file) 10H Read only
F17 (input data file) 11H Read only
F19 (alarm output file) 13H Read only
F21 (transmission input data file) 15H Write only
F22 (message file) 16H
F33 (daily report file 1) 21H Read only
F34 (daily report file 2) 22H Read only
F35 (daily report file 3) 23H Read only
F37 (integral file 1) 25H Read only
F38 (integral file 2) 26H Read only
F51 (status information control file) 33H
To Next Page
Loading...
Need help?
General
