In optional mode Differential Weighing ( )
From the [Standard ] home screen, to print postage on mail pieces:
1. Place the stack of mail you want to process on the Weighing Platform, and then follow
the instructions on the screen or the steps below.
2. Withdraw the first mail piece from the top of the stack. The Mailing System displays
weight and postage on the home screen and starts motors automatically.
3. To print the stamp, insert the mail piece into the base against the rear-guide wall, with
the side to be printed facing upwards.
If a mail piece is bigger than mail path maximum thickness (see
Mail Specifications on page 237 ), press to print a label. The
label is printed.
4. The Mailing System applies postage and the mail piece (or label) is sent to the catch
tray.
When sealer is activated, collect the mail piece stack in the catch
tray and put stack aside to let envelopes dry.
5. Repeat the previous step for each piece of mail.
To quit the process at any time, press .
When you remove the last object from the Weighing Platform,
the Mailing System will ask if you want to print it. You can answer
Yes or No.
3
Processing Mail
47
| Page 47 | feb-14-2014 12:06 |
To Next Page
Loading...
