Herma 400 - Page 10


T
ABLE OF CONTENTS Operating instructions HERMA 400
10/154 3.28 US (130519)
11.2.59 SM851 Winder failure Temperature too high 140
11.2.60 SM854 Rewinder failure Power stage 140
11.2.61 SM865 Loop filler failure 140
11.2.62 SM910 Drive failure Low voltage 140
11.2.63 SM911 Drive failure High voltage 140
11.2.64 SM912 Drive failure High temperature 140
11.2.65 SM913 Drive failure Overload (period) 140
11.2.66 SM914 Drive failure 140
11.2.67 SM916 Drive failure 140
11.2.68 SM917 Drive failure Powerfail 141
11.2.69 SM918 Drive failure 141
11.2.70 SM919 Drive failure Low voltage (peak) 141
11.2.71 SM920 Drive failure Overload (peak) 141
11.2.72 SM921 Drive failure 142
11.2.73 SM922 Drive failure 142
11.2.74 SM923 Drive failure 142
11.2.75 SM924 Drive failure Overload 142
11.2.76 SM925 CAN communication disturbed 142
11.2.77 SM926 Drive failure: Overload (vMax exceeded!) 142
11.2.78 SM999 Drive mode was changed! f-button = restart 143
11.3 Malfunction table (LED indication) 144
11.3.1 Remedy of malfunctions 145
11.4 Error blink codes with PLC connection 145
11.5 Other malfunctions 146
11.6 Replace the drive unit 148
11.6.1 Remove the drive unit 148
11.6.2 Ship the drive unit 150
11.6.3 Mount the drive unit 150
11.7 Technical Service 150
12 Spare parts 151
A1 Index 153