Herma 400 - Auxiliary Control System; 268: Auxiliary Start Delay; 269: Auxiliary Stop Delay

9
Operation (via the HERMA 400 control)
Operating instructions HERMA 400
118/154 3.28 US (130519)
9.9.25 267 Auxiliary control system
An additional output can be activated for special applications, e.g. a hold-down clamp. To enable
universal use of this output, the trigger can be controlled by different events.
Standard: 
Triggering via product recognition.
Prism start: 
Triggering via prism activation.
Prism stop: 
Triggering via prism deactivation.
Label start: 
Triggering with start of labeling.
Label stop: 
Triggering with end of labeling cycle.
9.9.26 268: Auxiliary Start delay
Start delay until activation of auxiliary output.
9.9.27 269: Auxiliary Stop delay
Activation duration of auxiliary output.
——————————End of parameters for type 152C——————————