3.28 US (130519) 151/154
12 Spare parts
Online ordering
You can conveniently order your spare parts for the HERMA 400 applicator in HERMA‘s online shop:
https://machines.herma.com
Ordering information
> For other processing of spare parts orders we absolutely need the material number (Mat.-No.).
> In order to avoid queries please state applicator number as well.
You can find this number on the type label. The silver type label you can find at the side of the
applicator housing.
Exploded drawings
You can find exploded drawings of the HERMA 400 sub-assemblies in a separate document.
Important: In case you replace the I/O board make sure to remove the
applicator chip from the old board. You need the chip for the new
board!
To Next Page
Loading...
