Herma 400 - Printer Print Time; Printer Printing Length

9
Operation (via the HERMA 400 control)
Operating instructions HERMA 400
112/154 3.28 US (130519)
9.8.32 195 Printer Print time
The time in milliseconds given for one print process, if the printing mode is set to „Standstill“
(adjustable with PWL3 only).
Note: This time will have no effect when using the hot-foil printer Allen Compact 40/20 CL and
thus is in such case always to be set to 10 ms. For this printer the print time is to be
adjusted in the printer’s control. See the corresponding manual.
9.8.33 195 Printer Printing length
The length in millmeters given for one print process, if the printing mode is set to „In motion“
(adjustable with PWL3 only).