Herma 400 - Page 6


T
ABLE OF CONTENTS Operating instructions HERMA 400
6/154 3.28 US (130519)
connection 79
6.1 Transporting the applicator 79
6.2 Installing the applicator 79
6.3 Storing the applicator 82
6.4 Electrical connection 83
6.4.1 Connections 84
6.5 Inserting the label web (web paths) 86
6.5.1 Right-hand applicator with standard dispensing plate 86
6.5.2 Left-hand applicator with standard dispensing plate 86
6.5.3 Right-hand applicator with pivot beak 87
6.5.4 Left-hand applicator with pivot beak 87
6.5.5 Right-hand applicator with dispensing plate with spring-loaded roller, 75° angular 88
6.5.6 Left-hand applicator with dispensing plate with spring-loaded roller, 75° angular 88
6.5.7 Winder system, left-hand applicator 89
6.5.8 Winder system, right-hand applicator 90
6.5.9 Winder system, loop-type unwinder 91
7Putting into operation 93
8 Putting out of operation 95
8.1 End-of-life disposal 95
9 Operation (via the HERMA 400 control) 97
9.1 Design (keypad and display) 98
9.2 Function diagram 100
9.3 End of reel and diminishing reel (internal) 101
9.4 Overview display structure
HERMA 400 102
9.5 The display’s Quick Menu 103
9.5.1 Format selection (Quick Menu parameter, optional) 103
9.5.2 Start delay applicator (Quick Menu parameter) 104
9.5.3 Stop delay label (Quick Menu parameter) 104
9.5.4 Speed difference between applicator and application roller (029) 104
9.5.5 Speed of the applicator (Quick Menu parameter) 105
9.5.6 Speed of the product (Quick Menu parameter, optional) 105
9.5.7 Conveyor speed 152 (036) 105
9.5.8 Product speed transverse transfer system (037) 105
9.6 Potentiometers 106
9.7 The display’s configuration menu 106
9.8 Menu 100 Basic data 107
9.8.1 115 Master enc. transfer 107
9.8.2 116 Master enc. transfer Label pos. difference 107
9.8.3 120 Master encoder Pulses / revolution 107
9.8.4 121 Master encoder Distance / revolution 107
9.8.5 122 Master encoder Start compensation 107
9.8.6 123 Master encoder Stop compensation 108
9.8.7 124 Master encoder Mini loop on/off 108
9.8.8 125 Master encoder Mini loop start delay 108
9.8.9 126 Master encoder Mini loop size 108
9.8.10 127 Master encoder rollfed Cutter distance 108
9.8.11 128 Master encoder rollfed Difference StSt cont. 108