3. Touch REGISTER.
The set screen brightness is registered, and then the display returns
to the MODE FUNCTION menu dialogue.
NOTE: To cancel setting, touch CANCEL.
6.5 Buzzer Volume <Normal>
This mode is used to change the beep sound settings (error warning,
end of a test).
6.5.1 Error Sound
1. Touch BUZZER VOLUME in the MODE FUNCTION menu
dialogue.
The buzzer volume dialogue is displayed.
IMPORTANT
There are 2 types of buzzer sound: one is error sound; another is
test end sound.
2. Touch ERROR SOUND.
The error sound dialogue is displayed
3. Touch DESIRED VOLUME.
When touching DESIRED VOLUME, a sound, which you have
selected, will be heard.
4. Touch DESIRED TONE.
When touching DESIRED TONE, a sound, which you have
selected, will be heard.
Tone buttons
Low
Volume buttons
High
78
To Next Page
Loading...
