Heska Element DC - Display Temperature & Humidity; Lot Information

6.7.2 Display Temperature & Humidity
This mode is used to display CM & ISE incubator temperature and environmental temperature & humidity (inner body).
1. Touch DISPLAY INFORMATION in the MODE FUNCTION
menu dialogue.
The display INFORMATION menu dialogue is displayed.
2. Touch DISPLAY TEMPERATURE & HUMIDITY in the menu
dialogue.
The display temperature & humidity dialogue is displayed.
3. Touch BACK.
The display returns to the INFORMATION menu dialogue.
6.7.3 Lot Information
This mode is used to display or print out the slide lot numbers
presently recorded in the analyzer.
1. Touch DISPLAY INFORMATION in the MODE
FUNCTION menu dialogue.
The display INFORMATION menu dialogue is displayed.
83