8.6 Message Reference
160
:SYSTem:DATE
Sets the date (p. 227)
:SYSTem:DATE?
Queries the date (p. 227)
:SYSTem:FILE?
Queries the content of a panel (p. 229)
:SYSTem:FILE:NAME
Sets the panel name (p. 234)
:SYSTem:FILE:NAME?
Queries the panel name (p. 234)
*
:SYSTem:FREQuency
Sets the frequency range (p. 234)
*
:SYSTem:FREQuency?
Queries the frequency range (p. 234)
:SYSTem:LANGuage
Sets the display language (p. 235)
:SYSTem:LANGuage?
Queries the display language (p. 235)
:SYSTem:LOAD
Loads a panel (p. 235)
:SYSTem:LOWer
Sets the all allowable value (lower limit)
On/Off
(p. 235)
:SYSTem:LOWer?
Queries the all allowable value (lower limit)
On/Off
(p. 235)
:SYSTem:LOWer
:COEFficient
Sets the all allowable value (lower limit) coef-
ficient
(p. 236)
:SYSTem:LOWer
:COEFficient?
Queries the all allowable value (lower limit)
coefficient
(p. 236)
:SYSTem:MODE
Sets the mode (p. 237)
:SYSTem:MODE?
Queries the mode (p. 237)
:SYSTem:POLarity
Sets the polarity switching (p. 237)
:SYSTem:POLarity?
Queries the polarity switching (p. 237)
:SYSTem:SAVE
Saves a panel (p. 238)
:SYSTem:RESet
Initializes the HiTESTER (p. 238)
:SYSTem:TEST:FUSE?
Queries the fuse check (p. 238)
:SYSTem:TEST:FUSE:STARt
Sets the fuse check (At power on) (p. 239)
:SYSTem:TEST:FUSE:STARt?
Queries the fuse check (At power on) (p. 239)
:SYSTem:TEST:RELay?
Queries relay check (p. 239)
:SYSTem:TEST:RELay:STARt
Sets the relay check (At power on) (p. 239)
:SYSTem:TEST:RELay:STARt?
Queries relay check (At power on) (p. 239)
:SYSTem:TEST:VA?
Queries the VA check (p. 240)
:SYSTem:TEST:VA:STARt
Sets the VA check (At power on) (p. 241)
:SYSTem:TEST:VA:STARt?
Queries the VA check (At power on) (p. 241)
:SYSTem:TIME
Sets the time (p. 241)
Messages Explanation Ref page