2 Select “Yes” by pressing “ ” or “ ” and press “OK”.
The indication of “FLTR” will be turned OFF and the
screen will return to the normal mode.
FLTR
OK
Reset filter sign?
Filter Sign Reset
Yes No
SEL. ENT
TN.
OK
OK
Elevating Grille
This function is used to move the air inlet grille automatically upward or downward from the air panel when cleaning the
air lter and air inlet grille.
CAUTION
Caution of Setting Elevating Grille into Air Panel After Cleaning:
When the air inlet grille is set inside the air panel, ensure that the air inlet grille is horizontal and the wire is suspended tightly without loos-
ening. After the above is ensured, set the air inlet grille. If the air inlet grille is inclined and the wire is loosened, they may be caught in the
pulley. It may lead to a failure of the pulley or pulley block. If the worst happens, it may cause personal injury due to falling the air panel.
Horizontal
Wire
Air inlet grille
Slowly push the air inlet grille in
the arrow direction
Wire is loosened
N OTE
• This function is available only when the elevating grille is equipped with the indoor unit.
• Make sure that the unit operation is stopped before using the elevating grille.
• The elevating grille function is not available when the unit is operated.
1 Press “ ” (menu) and select “Elevating Grille” from the menu.
Press “OK”.
NOTE
If the number of indoor units connected with the remote control is 1, the
screen passes directly to display the step 3 after this step.
Menu
Schedule Timer
Simple Timer
Function 3
Elevating Grille
01
/
03
Filter Sign Reset
15:10(Fri)
ENT
TN.SEL.
OK
OK
OK
4 Individual remote controls
PC-ARF
TCGB0106 rev.0 - 12/2014
92
To Next Page
Loading...
Need help?
General
