5.2.4.2 Main Screen
Overall view
“Monitor 1 (All Groups)”
Current display
Indicates the current display (All
Groups)
Unit state
Indicates the state of the unit with
icons like lter sign, demand, etc.
Block button
The screen display changes into
“Block” Monitor 2 (Block) display by
tapping this button.
Group button
Indicates the operation state of each
group as follows:
Green: Running
Grey: Stopped
Red: Abnormal
If the target group button is tapped,
“Settings” of the target group screen
will be indicated.
“Stop all” button
Stops all the units controlled by the
central station at once.
“Run all” button
Runs all the units controlled by the
central station at once.
“Setting of all” button
Changes the setting of all the units
controlled by the central station at
once.
“Menu” button
Displays menu
items such as “Fil-
ter Sign Reset”,
“Schedule Setting”,
etc.
“Icon Guide”
Button
Displays an ex-
planation of the
Icons.
“Alarm Inform.” button
Provides detailed information
about abnormalities.
5 Centralised remote controls
PSC-A32MN
TCGB0106 rev.0 - 12/2014
313
5
To Next Page
Loading...
Need help?
General
