Hitachi PSC-A1T - Individual Remote Controls; Pc-Arf

3 Features and benets
Individual remote controls
TCGB0106 rev.0 - 12/2014
3636
3.1 Individual remote controls
3.1.1 PC-ARF
PC-ARF: Remote control with timer
Advanced Legibility and Attractive design
• The newly adopted LED-backlit LCD provides enhanced legibility.
• Large, clear character display is realized by Full Dot Matrix LCD.
Operation Improvement
• The newly adopted directional key provides optimised operation. The manual operation is facilitated by reducing num-
ber of switch buttons from 13 to 9.
• 4 types of menus are offered for exible use as follows:
- Menu: Contains “Schedule Timer”, “Elevating Grille”, etc. for users.
- Help Menu: Contains information provided by this remote control switch for users such as “About Operation”, “Con-
tact Information”, etc.
- Test Run Menu: This menu provides the functions for installation of this remote control switch.
- Check Menu: This menu provides the functions for service and maintenance.
Schedule Timer
• “Schedule Timer” provides the timer operations for “Run/Stop” and “Temperature Setting”. The weekly management is
available by using this function. Additionally, “Holiday Setting” and “Schedule ON/OFF” setting are available.
Simple Timer
• In addition to the scheduled timer operation above, “Simple Timer” (timer operation for one day) is offered.
Adjusting Brightness of Run Indicator
• Going to “Menu” “Screen Display Setting”, brightness of run indicator is adjustable by the dimmer function for the night
time.
Improvement Provides
• The air conditioner can always be controlled under the same specied temperature condition. When the unit is restarted
by remote control switch, the temperature automatically changes to the specied value by “Eco-operation (Item: J8)” of
“Function Selection”. The temperature is specied by “Automatic Reset Temperature for Cooling (Item: F5)” and “Auto-
matic Reset Temperature for Heating (Item: F6) of “Function Selection”.
Operation Mode:
• “COOL” for cooling, “HEAT” for heating, “DRY” for dehumidication, “FAN” for ventilation and “AUTO” for automatic
cooling/heating changeover.
Other functions
• Allows all indoor unit functions to be selected and changed.
• Malfunction or problem warnings with alarm code indications.
• Just one remote control can control up to 16 indoor units.
• Built-in temperature sensor.