5.2.4 Operation
5.2.4.1 Test run
The outline of the test run procedure is indicated as shown in the îš¿gure. The items marked with the thick frame (
)
are required items.
The rest of items, which are not speciîš¿cally required for the test run procedure but they are optional, are explained in its
speciîš¿c section.
NOTE
The actual design of the screens may vary with respect to the screenshots shown in this chapter.
Start
Power ON
Language setting Setting temperature range of remote control
Date and time settings Optional function setting
Setting of control patterns
Exception setting of run/stop operation
Group register External input/output setting
Group name register Button setting
Schedule setting Contact information register
Optional function setting
End of test run
5 Centralised remote controls
PSC-A32MN
TCGB0106 rev.0 - 12/2014
299
5
To Next Page
Loading...
Need help?
General
