6 Building air conditioning controls
CSNET Manager LT/XT
TCGB0106 rev.0 - 12/2014
581581
6
6.2.4.7 Operation with slave CSNET Managers
One CSNET Manager can read units from another CSNET Manager. This second CSNET Manager could have more than
one devices conîš¿gured, this means that to keep an unique identiîš¿er of the units, CSNET Manager show the CS Port as
follow:
[Slot on the current CSNET Manager].[Slot inside the remote CSNET Manager]
On the following image we can see an example of that:
This addressing is used along the screens to make easy to identify the remote units.
Not all the functions can be managed through a remote CSNET Manager, the following table shows which ones can be
done:
Display data from remote
CSNET Manager
Modiîš¿ed to remote CSNET
Manager
Work locally with CSNET
Manager remote units
IU Table/ IU Matrix – send
orders
O O O
Building Layout with File X X X
Timer X X O
Historical data O - -
Power consumption O - -
Web O O -
Mail alarm X X O
Fidelio X X O
Modbus Server X X O
Unit conîš¿guration O O X
Auto C/H O O X
Fan stop heating O O X
Cold Draft O O X
OU options O O X
Power meter X X X
O = available, X = not available, - = do not apply
NOTE
A combination of one CSNET Manager and one HC-A64NET is who controls the units. In case of a remote CSNET Manager viewing
another one, it never should be stopped the CSNET Manager – HC-A64NET that owns the Indoor units.
To Next Page
Loading...
Need help?
General
