4.1.4.3 Operation mode selection procedure
Procedure for operation in cooling, heating, dry, cooling/heating automatic and air ow operation
modes
Function
• Cooling Operation (COOL): To decrease the room temperature.
• Heating Operation (HEAT): To increase the room temperature.
• Dry Operation (DRY): To decrease the humidity in the room.
• Cooling/Heating Automatic Operation (AUTO): To cooling and heating automatic changeover.
• Air Flow Operation (FAN): To circulate the air in the room.
NOTE
The available set temperature is as follows:
• Cooling Operation: 19 to 30 ºC
• Heating Operation: 17 to 30 ºC
• Dry Operation: 19 to 30 ºC
Mode selection
1
Turn ON the power supply.
Connecting
2
Press “
” or “ ” and select “MODE”.
A/C
MODE SPEED TEMP
COOL
HIGH
SPEED ADJ
Meeting Room
3
By pressing “
” or “ ”, the operation mode will be changed as
follows.
NOTE
The advanced setting is required for the “AUTO” operation. Contact your dis-
tributor or dealer of HITACHI for detailed information.
FAN
AUTO
DRY
HEAT
COOL
A/C
MODE SPEED TEMP
HEAT
HIGH
SPEED ADJ
Meeting Room
4 Individual remote controls
PC-ARF
TCGB0106 rev.0 - 12/2014
88
To Next Page
Loading...
Need help?
General
