Hitachi PSC-A1T Technical Catalogue


Procedure for setting the temperature, fan speed and louver direction.
Setting the temperature
1 Press “
” or “ ” and select “TEMP”.
A/C
MODE SPEED TEMP
COOL
HIGH
SPEED ADJ
Meeting Room
OK
2 By pressing “ ”, the temperature is increased by 1oC. (Max.
30oC). By pressing “
”, the temperature is decreased by 1
ºC. (Cooling, Dry, Air Flow operation: Min. 19oC) (Heating
operation: Min. 17 ºC).
NOTE
The max/min temperature is available to change by setting the cool-
ing lower limit for setting temperature (or heating upper limit for setting
temperature) from the function selection.
A/C
MODE SPEED TEMP
COOL
HIGH
SPEED ADJ
Meeting Room
OK
Setting the fan speed
1 Press “
” or “ ” and select “SPEED”.
A/C
MODE ADJTEMP
MODE SPEED TEMP
COOL
HIGH
Meeting Room
OK
2 By pressing “ ” or “ ”, the fan speed will be changed as
follows.
NOTE
• During the dry operation, the fan speed is automatically changed
to “LOW” and cannot be changed to other fan speed. (“LOW” will
NOT be displayed on LCD (liquid crystal display) at this time. The
present setting condition will be displayed on LCD).
• The fan speed settings “HIGH H” and (or) “AUTO” may not be avail-
able depending on the indoor unit type.
A/C
MODE ADJTEMP
MODE SPEED TEMP
COOL
LOW
Meeting Room
OK
4 Individual remote controls
PC-ARF
TCGB0106 rev.0 - 12/2014
89
4

Hitachi PSC-A1T Specifications

General

Brand	Hitachi
Model	PSC-A1T
Category	Controller
Language	English