5.2.4.3 Menu
The table below shows the menu items and their functions.
Item Function
Filter Sign Reset
This function is used for turning off the lter sign display of indoor units in which lter sign has occurred.
Regardless of the occurrence of the lter sign, it is also possible to reset the display time of the lter sign in
the air conditioner units.
Schedule Setting
This function is used to start and stop the operation of air conditioners at the desired time.
It is possible to set the schedule in block and group units.
Schedule Timer
Setting
This function is used for setting the time (by the minute), “Run/Stop” and temperature (19~30 oC).
For weekly schedule setting, up to 10 schedule items can be set per day.
It is also possible to copy the setting contents.
Holiday Setting
This function is used for suspending the schedule operation temporarily.
Scheduled operation remains suspended when the day is set as holiday.
This function is used for setting irregular holidays such as national holidays.
Schedule Timer
ON/OFF Setting
“Schedule Timer OFF Setting” is used for suspending scheduled operation for the target group.
Scheduled operation remains suspended when Schedule Timer is OFF.
This function is used for long holidays, sudden holidays, national holidays, etc.
Adjusting Remote Con-
trol Switch Setting Tem-
perature Range
This function is used for limiting the setting temperature range of the remote control.
It is possible to dene a minimum setting temperature for cooling and a maximum setting temperature for
heating.
Adjusting Date/Time This function is used for adjusting date and time.
Touchscreen Cleaning
This function is used when cleaning the LCD screen of the central station.
The screen returns to “Menu” when it is not tapped for 10 seconds.
Touchscreen Calibration
This function is used for calibrating (correcting) the recognition position of the touchscreen of the control.
This function shall be used when there is a continued lack of response to the press of the buttons dis-
played on the screen.
Group Name Register
This function is used for registering the names of blocks and groups.
The maximum length allowed for the name of each block or group is of 16 characters. It is also possible to
copy names
If a group or block is registered without a name, it is registered as “Group 1” or “Block 1” automatically.
Screen Display Setting These functions are used for adjusting settings related with the screen display.
Brightness This function is used for adjusting the brightness of the touchscreen display.
Language Setting This function is used for changing the display language.
Temperature Unit This function is used for changing the temperature unit.
Accumulated
Operation Time
This function is used for indicating the accumulated operation time of the air conditioner.
• The value of accumulated operation time is displayed by month.
• The operation time is displayed for 16 months, including the current month.
• It is also possible to display “Thermo ON time” by setting the appropriate controller option.
Contact Information This function is used for displaying the service contact address and the latest alarm code.
5 Centralised remote controls
PSC-A32MN
TCGB0106 rev.0 - 12/2014
327
5
To Next Page
Loading...
Need help?
General
