6 Building air conditioning controls
CSNET Manager LT/XT
TCGB0106 rev.0 - 12/2014
612612
6.2.6 Troubleshooting
6.2.6.1 Physical keyboard does not type proper characters
In case that want to connect a USB keyboard and it does not t to the keys maps of the system, change the keyboard layout
by following that instructions:
1 Connect a USB mouse
2 Close the program (Local computer conguration -> touch screen settings -> close)
3 Right click on the “GB” icon on the top of the desktop and select “Keyboard layout handler settings” option.
4 Inside the keyboard layout handler, nd your language ag on the list. If it does not exist, add it.
5 Move your ag to the top of the list with the button “up”. This will make your keyboard layout the default option each
time that you will connect a new one.
6.2.6.2 Use of system tray
If user close the window using the cross button, application will still run setting an icon on the system tray.
Clicking twice over the system tray icon will open the application. Using right button of the mouse over it will open a little
menu that will allow to the user between close completely the application or open it.
User will normally have the application closed on the system tray, because it will not be always managing things. But having
that icon there will be so useful due to the alarm notication.
Alarm
Alarm Description:
Unit [Port: 1, Ou: 11, Iu: 1] - > Alarm Code: 99
When an alarm occurs system tray icon will switch to red colour and it will be like this until alarm will be disappeared. Alarm
displaying message should be activated on the user conguration.
First time than alarm occurs it will appear a system notication showing that this alarm has been appeared with the alarm
code and unit address.
Alarms could also be watched on the alarm led of the virtual remote control or on the units list.
To Next Page
Loading...
Need help?
General
