5.1.4.3 Menu
The table below shows menu item and its function.
Item Function
Filter Sign Reset
This function is used for turning off the lter sign of the connected indoor units.
This function can be used only for the indoor unit with “Filter Sign”.
Schedule Setting This function is used for scheduled timer operation which is possible to set by each block or group.
Schedule Timer Setting
This function is used for setting the time (by the minute), “Run/Stop” and temperature (19~30 ºC).
For weekly schedule setting, up to 10 schedule items can be set per day.
It is also available to copy the setting contents.
Holiday Setting
This function is used for suspending the schedule operation temporarily.
The schedule operation will not be available when this function is set.
This function is used for setting irregular holidays such as national holidays.
Schedule Timer ON/OFF
Setting
“Schedule Timer OFF Setting” is used for suspending the schedule operation for the target group.
The schedule operation will not be available when Schedule Timer is OFF.
This function is used for a long holiday, sudden holidays, national holidays, etc.
Adjusting Date/Time This function is used for adjusting date and time.
Touchscreen Cleaning This function is used for cleaning LCD (liquid crystal display) of central station.
Touchscreen Calibration
This function is used for calibrating the tap position for touchscreen.
This function is used if the operation is not carried out smoothly when the button on the touchscreen
is tapped.
Group Name Register
This function is used for registering name of the block and group.
The registrable number of letters are maximum 20 letters for the name of each block or group.
It is also available to copy the name.
If the group/block is registered without name, it will be registered as “Group 1” or “Block 1” automati-
cally.
Screen Display Setting This function is used for setting the screen display.
Brightness This function is used for adjusting the brightness of the touchscreen display.
Language Setting This function is used for changing the displayed language.
Temperature Unit This function is used for changing the temperature unit.
Accumulated Operation Time
This function is used for indicating the accumulated operation time of the air conditioner.
The accumulated operation time will be indicated by month.
The operation time is memorized for 15 months.
Contact Information This function is used for indicating the service contact address and the latest alarm code.
Service menu
This switch is for the serviceman only. Therefore do not use it. If this switch is used and the service
menu is indicated on the screen, tap “Back”. The screen will return to the menu.
5 Centralised remote controls
PSC-A64GT
TCGB0106 rev.0 - 12/2014
250
To Next Page
Loading...
Need help?
General
