Contact Information Registration
Contact information can be registered from “Contact Information”.
1 Press and hold “
” (menu) and “ ” (return) simultaneously for at least 3 seconds during the normal mode (when unit
is not operated). The test run menu is displayed then.
2 Select “Contact Information” from the test run menu and press “OK”. The contact information 1 is displayed then.
3 Press “?” (help) to change font type.
Contact Information 1
OK
?
'
1
q
€
<
+
2
w
a
>
*
3
e
s
z
;
4
r
d
x
.
5
t
f
c
?
6
y
g
v
←→
-
7
u
h
b
/
8
i
:
9
o
k
m
j
n
l
,
=
0
p
ABC
abc
Sym.1
Sym.2
SPAC
DEL FIN.
ENT. FIN.SEL. Letter
4 Press “ ” to select letter.
5 Press “OK” to conrm the letter. (Max.: 28 letters)
6 Select “FIN.”, press “OK” (or simply press “
” (menu)) and the step
7 is displayed.
7 Repeat steps 3~5 to register contact information 2.
Select “FIN.” and press “OK”, then the conrmation screen is displayed. (or simply press “
” (menu)).
8 Select “Yes” and press “OK”. The test run menu is displayed after the
setting is conrmed. If “No” is pressed, the screen returns to step 3.
OK
Save changes?
Yes No
ENT
TN.SEL.
Electric Corp.
4 Individual remote controls
PC-ARF
TCGB0106 rev.0 - 12/2014
87
4
To Next Page
Loading...
Need help?
General
