4 Individual remote controls
PC-ARF
TCGB0106 rev.0 - 12/2014
111
4
Troubleshooting
This function is used to troubleshoot.
Make sure that the troubleshooting is read carefully before requesting for repairs.
1 Select “Troubleshooting” from the help menu and press
“OK”. The list of troubleshooting is displayed then.
OK
OK
OK
Help Menu
Contact Information
Troubleshooting
About Operation
About Indication
ENT
TN.SEL.
2 Select a problem from the list by pressing “ ” or “ ”,
press “OK” and the details of the selected problem are
displayed.
OK
OK
OK
Troubleshooting
Generation of Mist
Fan speed is not as set.
COOL/HEAT OP NOT POSSIBLE
Operation stops.
01
/
03
Unit does not operate.
ENT
TN.SEL.
3 Press “ ” or “ ” to scroll the text up and down.
Troubleshooting
Following do not indicate a failure
01
/
06
Unit does not operate.
Condition:
HOT-ST is indicated on the
display of the remote comtrol switch.
Cause: The control to heat compressor
is activated in order to extend the
life of the product.
Next Page RTN.
OK
4
Press “
” (return). The screen returns to the list of
troubleshooting.
OK
Troubleshooting
Generation of Mist
Fan speed is not as set.
COOL/HEAT OP NOT POSSIBLE
Operation stops.
01
/
03
Unit does not operate.
ENT
TN.SEL.
OK
5
Press “
” (return). The screen returns to the help
menu.
To return to the normal mode, press “
” (return) again.
OK
Help Menu
Contact Information
Troubleshooting
About Operation
About Indication
ENT
TN.SEL.
OK
To Next Page
Loading...
Need help?
General
