Hitachi PSC-A1T - Page 285

Display by group
1 Select “Accumulated Operation Time” from the screen of “Menu”.
Back
Menu
25/01/2010 (Mon) 10:20
Filter Sign Reset Schedule Setting
Adjusting
Date/Time
Touchscreen
Cleaning
Touchscreen
Calibration
Group Name
Register
Screen Display
Setting
Accumulated
Operation
Time
Contact
Information
Service Menu
(1)
2 Tap “Display by Group”.
Accumulated
Ope.Time
<>
Done
Display by
Group
25/01/2010 (Mon) 10:20
2010. 1
0100 200300 400500 600700 (h)
Group1B-01 217
Group1B-02 190
Group1B-03 147
Group1B-04 216
Group1B-05 257
Group1B-06 244
Group1B-07 291
Group1B-08 198
Group1B-09 288
Group1B-10 192
Group1B-11 200
Group1B-12 334
Group1B-13 104
F-Level
1-B
F-Level
1-A
F-Level
2
Annex
(2)
3 Select the target block tab.
4 Tap “<” or “>” and select the target group. The operation time for the group in the selected block is indicated.
5 Tap “Done” to return to the screen of “Monitor 1 (All Groups)” or “Monitor 2 (Block)”.
If “Display by Month” is pressed, the screen will be changed to (2).
Accumulated
Ope.Time
<>
Done
Display by
Group
25/01/2010 (Mon) 10:20
2010. 1
0100 200300 400500 600700 (h)
Group1B-01 217
Group1B-02 190
Group1B-03 147
Group1B-04 216
Group1B-05 257
Group1B-06 244
Group1B-07 291
Group1B-08 198
Group1B-09 288
Group1B-10 192
Group1B-11 200
Group1B-12 334
Group1B-13 104
F-Level
1-B
F-Level
1-A
F-Level
2
Annex
(3)
(5)
(4)
Group Name
NOTE
Accumulated operation time of this central station is
for only reference. Hitachi does not warrant about
above reference accumulated operation time.
5 Centralised remote controls
PSC-A64GT
TCGB0106 rev.0 - 12/2014
269
5