Tap buttons “<” and “>” on the upper left of the touchscreen to continue with the setting of another Block, or tap the “Set-
ting complet.” button to exit.
(5)
(4)
6 Tap “Setting Complet.” to register the group and return to Group Register menu screen.
7 Tap “Monitor screen” to return to Monitor screen.
8 Tap “Service Menu” to return to Service Menu screen.
(6)
(7)
(8)
Registration of a group (Sub unit)
1
Select “Group Register” on the screen of “Service Menu”.
(1)
NOTE
This function cannot be selected when the external input signal is input to the external input terminal 1 or 2.
5 Centralised remote controls
PSC-A32MN
TCGB0106 rev.0 - 12/2014
307
5
To Next Page
Loading...
Need help?
General
