Hitachi PSC-A1T - Page 351

Deleting schedule setting by each group
1 Select “Schedule Settings” at the “Menu” screen.
2 Select “Schedule Timer Setting” at the “Schedule Settings” menu.
3 Tap “Delete Settings”.
4 Select the groups or blocks to delete their settings.
A check mark “
” is displayed in the selected groups and blocks.
It is possible to select multiple groups and blocks for deletion.
Tap the selected group again to cancel the selection. The check mark “
” disappears then.
(3)
(4)
5 Tap “Proceed” to continue to the conrmation window.
6 Tap “OK” at the conrmation window to delete the schedule settings.
Go back to step (4) to delete the schedule of other groups.
Proceed to step (7) to nish.
(5)
(6)
7 Tap “Return to Group sel.” to return to the “Group Selection” screen.
(7)
5 Centralised remote controls
PSC-A32MN
TCGB0106 rev.0 - 12/2014
335
5