1
Tap “Menu” on the “Monitor (All Groups)” or “Monitor (Block)” screens.
Monitor (All Groups) Monitor (Block)
(1)
(1)
2 “Menu” screen is displayed.
3 Press and hold “Service Menu” for at least 3 seconds. “Service Menu” is displayed.
4 Select the service menu item by tapping each item button. The setting screen of the tapped item will be displayed.
5 Tap “Menu” on the “Service Menu” to return to the “Menu” screen.
6 Tap “Monitor screen” to return to Monitor screen.
(4)
(5)
(6)
(2)
(3)
NOTE
Depending on the conditions of the air conditioner unit and the central station, the following items may not be selected.
*Group Register (*1)
* A/C unit and Remote Control Switch setting (Optional Function Setting) (*2)
* External Input/Output Setting (*1) (*2)
* Restore Settings (*1) (*3) (*4)
* Checking Connection (*1) (*2)
(*1): When the external input signal is ON.
(*2): When one air conditioner unit is operating.
(*3): When one air conditioner unit has the remote control switch restricted (“Without Remote Control Switch” not included)
(*4): When one outdoor unit is operating in capacity control.
5 Centralised remote controls
PSC-A32MN
TCGB0106 rev.0 - 12/2014
350
To Next Page
Loading...
Need help?
General
