6 Building air conditioning controls
CSNET Manager LT/XT
TCGB0106 rev.0 - 12/2014
587587
6
Create Building Layout le using wizard option
In order to make easy your layout creation you can import the current units of the CSNET Manager. To do this, you have
to open the option le properties and select the Import units tab.
Before creating your layout you must select the units used by the wizard function.
“Previously added by the user” means all units that user add entering values in shape edition.
Imported units are units that you can automatically import from CSNET Manager explained on the last point.
Next, you must to select how the wizard application will distribute your units.
It will create a zone for each port or port and outdoor that exists, entering inside a shape for each unit.
“Not divided” option will enter all the units in the root zone.
On next step you can specify the organisation of the units inside the zone.
You can group the units by port, by outdoor units or all in a same group.
NOTE
If you distribute and group units by same option, on each zone will be only a unit.
To Next Page
Loading...
