HP 6125XLG - Enable Link-Local-Signaling; Enable Out-Of-Band-Resynchronization

93
<Sysname> display router id
Configured router ID is 1.1.1.1
enable link-local-signaling
Use enable link-local-signaling to enable the OSPF link-local signaling (LLS) capability.
Use undo enable link-local-signaling to disable the OSPF LLS capability.
Syntax
enable link-local-signaling
undo enable link-local-signaling
Default
OSPF link-local signaling capability is disabled.
Views
OSPF view
Predefined user roles
network-admin
Examples
# Enable link-local signaling for OSPF process 1.
<Sysname> system-view
[Sysname] ospf 1
[Sysname-ospf-1] enable link-local-signaling
enable out-of-band-resynchronization
Use enable out-of-band-resynchronization to enable the OSPF out-of-band resynchronization
(OOB-Resynch) capability.
Use undo enable out-of-band-resynchronization to disable the OSPF out-of-band resynchronization
capability.
Syntax
enable out-of-band-resynchronization
undo enable out-of-band-resynchronization
Default
The OSPF out-of-band resynchronization capability is disabled.
Views
OSPF view
Predefined user roles
network-admin
Usage guidelines
Before you configure this command, enable the link-local signaling capability.