426
Predefined user roles
network-admin
network-operator
Parameters
basic-community-list-number: Specifies a basic community list by its number in the range of 1 to 99.
adv-community-list-number: Specifies an advanced community list by its number in the range of 100 to
199.
comm-list-name: Specifies a community list by its name, a case-sensitive string of 1 to 63 characters that
cannot comprise only numbers.
Usage guidelines
If no community list is specified, this command displays information about all BGP community lists.
Examples
# Display information about all BGP community lists.
<Sysname> display ip community-list
Community List Basic aaa
permit
Community List Advanced bbb
permit 3333
Table 98 Command output
Field Descri
Community List Basic Basic community list.
Community List Advanced Advanced community list.
permit
Match mode:
• permit.
• deny.
display ip extcommunity-list
Use display ip extcommunity-list to display BGP extended community list information.
Syntax
display ip extcommunity-list [ ext-comm-list-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ext-comm-list-number: Specifies an extended community list by its number in the range of 1 to 199.
Without this argument, the command displays information about all BGP extended community lists.
To Next Page
Loading...
