24
<Sysname> system-view
[Sysname] max-ecmp-num 10
The configuration will take effect at the next reboot. Continue? [Y/N]:y
Reboot device to make the configuration take effect.
After reboot, the maximum number of ECMP routes is 10.
reset ip routing-table statistics protocol
Use reset ip routing-table statistics protocol to clear IPv4 route statistics.
Syntax
reset ip routing-table statistics protocol [ vpn-instance vpn-instance-name ] { protocol | all }
Views
User view
Predefined user roles
network-admin
Parameters
vpn-instance vpn-instance-name: Clears the IPv4 route statistics for an MPLS L3VPN instance specified
by its name, a case-sensitive string of 1 to 31 characters. Without this option, the command clears route
statistics for the public network.
protocol: Clears route statistics for a routing protocol. It can be bgp, direct, isis, ospf, rip, or static.
all: Clears route statistics for all IPv4 routing protocols.
Examples
# Clear all IPv4 route statistics for the public network.
<Sysname> reset ip routing-table statistics protocol all
reset ipv6 routing-table statistics protocol
Use reset ipv6 routing-table statistics protocol to clear IPv6 route statistics.
Syntax
reset ipv6 routing-table statistics protocol [ vpn-instance vpn-instance-name ] { protocol | all }
Views
User view
Predefined user roles
network-admin
Parameters
vpn-instance vpn-instance-name: Clears route statistics for an MPLS L3VPN instance specified by its
name, a case-sensitive string of 1 to 31 characters. Without this option, the command clears the route
statistics for the public network.
protocol: Clears route statistics for an IPv6 routing protocol. It can be bgp4+, direct, isisv6, ospfv3, ripng,
or static.
To Next Page
Loading...
