HP 6125XLG - If-Match Acl; Ip Policy-Based-Route

324
pr01 Vlan-interface11
Table 71 Command output
Field Description
Interface Name Interface where the policy is applied.
Related commands
ip policy-based-route
if-match acl
Use if-match acl to configure an ACL match criterion.
Use undo if-match acl to remove the ACL match criterion.
Syntax
if-match acl acl-number
undo if-match acl
Default
No ACL match criterion is configured.
Views
Policy node view
Predefined user roles
network-admin
Parameters
acl-number: Specifies an ACL by its number in the range of 2000 to 3999 for a basic ACL and in the
range of 3000 to 3999 for an advanced ACL.
Examples
# Configure Node 11 of policy aa to permit the packets matching ACL 2011.
<Sysname> system-view
[Sysname] policy-based-route aa permit node 11
[Sysname-pbr-aa-11] if-match acl 2011
ip policy-based-route
Use ip policy-based-route to configure interface PBR by applying a policy to an interface.
Use undo ip policy-based-route to remove the configuration.
Syntax
ip policy-based-route policy-name
undo ip policy-based-route
Default
No policy is applied to an interface.